This listing is for a USED Sound Devices 442 Mixer with Sound Devices Bag & (3) Cables – Please see pictures for condition, the unit has been tested and works and was regularly serviced at local audio shop.
Developed with input from the industry’s top audio engineers, Sound Devices 442 encompasses the audio performance, feature set, and mechanical construction demanded by those who rely on audio gear for their livelihood. The 442 contains four microphone preamplifiers that re-define portable audio performance. With its comprehensive inputs and extensive outputs, including direct outputs per channel, the 442 is at home in small run-and-gun applications as well as large, multiple input productions. The 442 incorporates a complete feature-set into a compact, functional design. All controls are accessible on its three main surfaces; no hidden controls. The high-efficiency power circuitry runs the mixer from either four internal AA batteries or external 5–18V DC. The 442 and 442N, like all Sound Devices professional audio products, are designed to withstand the physical and environmental extremes of field production. Its compact mechanic construction strikes the perfect balance between access to all functions, and portability.
Inputs |
4 – Balanced 3-pin XLR male mic / line switchable |
Output |
2 – (L/R) Stereo 3-pin XLR female
2 – (L/R) TA3 male |
Monitor/Headphone Out |
Phones:
1/4″ TRS Phone female jack
1/8″ (3.5mm) mini female jack |
ALT I/O |
Direct Outputs:(1-4) TA3-male outputs
Tape Out / Mix Out: TA3-male output, 1/8″ (3.5mm) mini jack
Camera Out (RTN A): Hirose connector
RTN B: TA3-male output, 1/8″ (3.5mm) mini jack |
Link Input/Output |
Mix In: TA3-male input |
Impedance |
Inputs:
2k ohms, XLR, mic setting, < 600 ohm Mics
16k ohms, XLR, line setting, < 2k ohm outputs
Outputs:
85 ohms (actual), XLR factory Line setting, > = 600 ohm inputs
150 ohms (actual), mic setting, < 600 ohm inputs |
Gain |
XLR Inputs:
81dB, mic / 41dB, line line level setting
67dB, mic / 27dB, line -10dB setting |
Hum & Noise |
EIN: -126dBu (-128dBV) maximum (22Hz – 22kHz bandwidth, flat filter, trim control fully up) |
Frequency Response |
20Hz – 30kHz, +0.2, -0.5dB, -1dB @ 5Hz and 50kHz typical |
Distortion |
0.007% typical (1 kHz, +4 dBu at line out)
0.09% max (50Hz – 20kHz, +18dBu @ line out, fader fully up) |
Metering |
Stereo (L/R) 20 segment, sunlight viewable LED meters |
Control Voltage Out |
No |
Phantom Power |
12V, 12V-T & 48V |
Operating Temperature |
Operating: -20 degrees to 60 degrees Celsius, 0 to 95% relative humidity (non-condensing)
Storage: -40 degrees to 85 degrees Celsius |
Power |
4 – AA alkaline batteries
Locking 4-pin Hirose connector, external DC power (5 – 18 VDC) |
Dimensions |
2.1 x 6.5 x 11″ (53 x 165 x 279mm) (HxWxD) |
Weight |
4.5 lbs (2.0 kg) |
|
Reviews
There are no reviews yet.