The Sanken CUB-01 boundary microphone features a small profile while delivering a sound synonymous with large diaphragm microphones. The CUB-01 is an excellent choice for conferences, board rooms, court rooms, news broadcasts, film and more. The microphone features a unique square-shaped cardioid capsule which significantly enlarges the area of the diaphragm. This proprietary design results in a rich, natural, “full-bodied” sound quality that is often associated with large diaphragm condenser microphones.
The CUB-01 is easily installed into any surface with minimal effort and it’s miniature profile renders the microphone inconspicuous. The wide frequency response effectively reproduces speech, instruments and ambiance. The cardioid polar pattern effectively minimizes off-axis noise and ambiance while providing a focused pick up.
- Hemispherical – Cardioid Polar Pattern
- The CUB-01 features a cardioid pick up pattern at the upper-hemisphere of the capsule. The result is excellent noise and phase suppression at the surface while maintaining a generous pick up area at the top.
- Miniature Design
- The miniature design results in inconspicuous, low profile microphone placement.
- Square Capsule Design
- The square diaphragm results in a larger diaphragm area. The result is a sound quality synonymous with large diaphragm condenser microphones.
Unterminated Pigtail Connection – With the option to modify it with the connector of your choice.
TA5 Connector – To be used with Lectrosonics Transmitters.
TA5 / XLR – TA5F-TA5M break in the cable and the stock XLR connector on the TA5M end to be used with Lectrosonics Transmitters or hardwire via XLR connector.
XLR – Stock XLR Connector.
Please note that all connector modifications are done at Wilcox Sound. Please give us a call if time is an issue for you and we will do our best to accommodate your request.
|Directivity||Cardioid/front side of hemisphere|
|Frequency Range||60Hz – 15kHz|
|Sensitivity (nominal at 1kHz)||40mV/Pa (-28dB,0dB=1V/Pa)|
|Equivalent Noise Level (A-weighted)||16dB-A|
|Max SPL (1% THD)||120 dB SPL|
|Output Impedance at 1 kHz||180 Ohms|
|Powering||+48 ± 4V phantom|
|Current Consumption||Less than 1.8mA|
|Dimensions||32.5mm (diameter) X 14.0mm|
|Weight||45g (including cable) , 55g (48V I/F)|