Description
The Rode smartLav+ is a lavalier microphone for your Apple or Android mobile device that is designed to deliver high-quality audio recording. The smartLav+ clips onto your shirt or lapel, and the sensitive, omnidirectional condenser capsule captures the sound equally from all sides of the microphone. This design lends to an effective, hands-free recording of speeches, interviews, dictations, and more.
The smartLav+ is equipped with a Kevlar-reinforced cable that has been strain-tested up to 10kg to help ensure reliable performance. It uses a gray-sleeved TRRS connector to connect to your smartphone or tablet’s headphone input and it works with most audio recording apps.
The smartLav+ also features improved sensitivity and a higher signal-to-noise ratio over the original smartLav. The package comes with a mic clip with cable management, a foam pop shield, and a small carry pouch.
Compatible with iPhone 5S, iPhone 5, iPhone 5C, iPhone 4S, iPhone 4, iPad Air, iPad (3rd generation), iPad 2, iPad mini, iPod touch (4th and 5th generation) & many Android devices.
- Works with any audio app that records from the headset input
- Record, EQ, edit, and publish your audio with Rode Rec App for Apple iOS (not included)
- Foam pop shield softens vocal plosives and wind noise
- Mic clip with cable management included for neatly securing microphone to clothing
- Small pouch included for storage and transport
- Combine with SC3 adaptor to use with TRS devices
- Combine with SC6 dual TRRS input adaptor to use two smartLav+ with one smartphone
| Acoustic Principle | Pressure gradient |
| Active Electronics | JFET |
| Capsule | 0.10″ (2.54 mm) |
| Polar Pattern | Omnidirectional |
| Address Type | End |
| Frequency Range | 60 Hz ~ 18 kHz |
| Output Impedance | 3k Ω Typical |
| Signal-to-Noise Ratio | 67 dB |
| Maximum SPL | 110 dB SPL (@ 1 kHz, 1% THD into 1 KΩ load) |
| Maximum Output Level | 189.0 dBu (@ 1 kHz, 1% THD into 1 KΩ load) |
| Sensitivity | -35 dB (17.8 mV @94 dB SPL) |
| Equivalent Noise Level | 27 dB-A |
| Connector | TRRS |
| Maximum Output | 189 mV |
| Dynamic Range | 83 dB typical |
| Dimensions | 46.5 x 0.18 x 0.18″ (1180 x 4.5 x 4.5 mm), mic and cable |
| Weight | 0.211 oz (6.00 g) |
Wilcox Sound is an authorized RØDE Microphones dealer
