The DPA 4071 is a professional, low-profile lavalier microphone designed for broadcast and performance application. The omnidirectional polar pattern provides an even pick up response at the direct and off-axis sections of the microphone. The capsule grid provides a 5dB presence boost between 4-6kHz. This enhances intelligibility of speech by providing an “airy” signal character. Wide frequency and sensitivity response curves provide an overall professional tonal quality while minimizing noise on output.
The DPA 4071 microphone kit includes a miniature windjammer, three tie pods, a miniature mesh windscreen, a miniature concealer, three varieties of double-sided tape, miniature mic tape and carry case. This kit is all that is needed for any ENG / EFP, theatrical or broadcast application.
- Omnidirectional Polar Pattern
- The omnidirectional polar pattern provides a generous pickup at the direct and off-axis sections of the microphone.
- Presence Boost Grill
- The capsule features a grill that enhances high frequencies between 4 to 6kHz. The result provides an “airy” signal quality to the audio signal.
- Complete Field Kit
- The kit is designed to provide all the necessary accessories for field audio production, broadcast and performance applications.
What is in the box
The DPA FMK-SC4071 Film Microphone Kit contains:
1 x SC4071 Omnidirectional Mic, Presence Boost
10 x ADH0002 Double-sided Tape for Miniature Microphones Concealer
1 x ADH0004 Double-sided Mic Tape, 10 pcs.
1 x DMM0009 Miniature Concealer for 4071
1 x DUA0571 Windjammer for 4071, Grey Fur
1 x DUA0572 Miniature Mesh for 4071
|Principle of operation:||Pressure|
|Cartridge type:||Pre-polarized condenser element with vertical diaphragm|
|Frequency range, ± 2 dB:||100 Hz – 15 kHz with 5 dB soft boost at 4-6 kHz|
|Sensitivity, nominal, ±3 dB:||6 mV/Pa; -44.4 dB re. 1 V/Pa|
|Equivalent noise level A-weighted:||Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))|
|Equiv. noise level ITU-R BS.468-4:||Typ. 38 dB (max. 40 dB)|
|S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):||Typ. 68 dB (A)|
|Total harmonic distortion (THD):||<1% up to 123 dB SPL peak;<1% up to 120 dB SPL sine|
|Dynamic range:||Typ. 97 dB|
|Max. SPL, peak before clipping:||144 dB|
|Output impedance:||30 – 40 Ohm|
|Cable drive compability:||Up to 300 m|
|Power supply:||For wireless systems: Min. 5 V – max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V.|
|Weight:||9 g incl. cable and MicroDot connector|
|Capsule diameter:||5.4 mm|
|Microphone length:||17 mm|
|Cable length:||1.8 m (5.9 ft)|